Slitting difference between flat steel and steel plate

Slitting flat steel is a rectangular and slightly lip-shaped steel. The use of slitting flat steel can be a finished steel product. It can also be used as a thin slab of a welded tube blank and a rolled thin plate. There is a difference between the use of steel and the steel plate. Here's an introduction:

(1) The surface of the slitting flat steel is very smooth, and the secondary high-pressure water descaling procedure is used in the production process, which ensures that the surface of the steel is very smooth.

(2) Both sides of the slitting flat steel are vertical, and the water chestnut is very clear. In the two vertical rolling processes during finish rolling, it can be ensured that the verticality of the edge portions on both sides is better, and the angle is clear. And the quality on the surface of the edge is better.

(3) Slitting flat steel is a kind of scale accuracy, using a three-point difference method, and the same level is better than the standard steel plate, and the flat steel is straight, the plate type is good, its fine In the rolling process, the continuous rolling process is used. It is an automatic loop automatic control method, which can ensure that no steel is stacked and steel is not pulled, and the dimensional precision of the slitting flat steel is very high, and the type of plate is The straightness is very good, and the cold shearing method is used, and the accuracy of the length of the length is relatively high.